Ic-realtime Flex Series: 8-CH High Performance H.264E 2U DVR w Manual do Utilizador

ICRealtime N6 Series Standalone DVR User’s Manual

ixImportant Safeguards and Warnings 1．Electrical safety All installation

90 Figure 5-54 5.5.5.1 Modify Password Click password button, the inte

91 Figure 5-56 5.5.5.3 Add/Modify User Click add user button, the inte

925.5.6 Auto Maintenance Here you can set auto-reboot time and auto-delet

93 Figure 5-60 5.5.9 Card Overlay The card overlay function is for fin

94With the protocol For ATM/POS with the protocol, you just need to set

95 Figure 5-64 5.5.10 Config Backup The configuration file backup inter

96 Figure 5-65 5.6 Information Here is for you to view system informati

97After system booted up, if there is any confliction, system goes to HDD

98Log types include system operation, system configuration, data manageme

99Here is for you to view hardware features, software version, built date

11 FEATURES AND SPECIFICATIONS 1.1 Overview This series product is an e

1005.6.6 Network Information In this interface, you can see network tes

101 Figure 5-74 5.7 Shutdown Double click shutdown button, system pops u

1026 About Auxiliary Menu 6.1 Go to Pan/Tilt/Zoom Menu In the one-wind

103In the middle of the eight direction arrows, there is a 3D intelligent

104 Figure 6-6 6.2.1 Preset Setup Note: The following setups are usually

105You can memorize all these setups as pattern 1. Figure 6-9 6.2.6 Ac

106 Figure 6-11

1077 WEB OPERATION There might be slightly difference in the interface

108 Figure 7-2 After installation, the interface is shown as below. See F

1097.3 LAN Mode For the LAN mode, after you logged in, you can see the

2Support network remote real-time monitor, remote record search and remot

110z Section 4: Instant record button. Click it, the button becomes yell

1117.4 Real-time Monitor In section 2, left click the channel name you

112Parameter Function Preset z Select Preset from the dropdown list.

113 Figure 7-13 7.6.2 Relay output Here you can select alarm output chann

114 Figure 7-16 Please refer to the following contents for LAN and WAN lo

115The window display mode and the channel number are by default. For exa

116The bigger the value is, the large the contrast between the bright and

117 Figure 7-19 Please refer to the following sheet for detailed informat

118Reference bit rate Recommended bit rate value according to the resolu

119 Figure 7-21 Please refer to the following sheet for detailed informat

3Video Input 4-CH composite video input: (NTSC/PAL) BNC (1.0VBP- P, B75Ω)

120 Figure 7-22 7.8.1.3 Channel Name Here you can set channel name. See F

121z If you select the static mode, you need to set the IP/submask/gatew

122TCP port The default value is 37777. You can input the actual port n

123 Figure 7-27 Please refer to the following sheet for detailed informat

124 Figure 7-28 7.8.2.5 PPPoE The PPPoE interface is shown as in Figure 7

125Please select DDNS from the dropdown list (Multiple choices). Before y

126z Server address：www.quickddns.com z Port number：80 z Domain name：Ther

127 Figure 7-32 Please refer to the following sheet for detailed informat

128Parameter Function load for the email server. Health mail enable P

129 Figure 7-34 Please refer to the following sheet for detailed informat

4Recording Mode Manual recording, motion detection recording, schedule re

1307.8.2.11 Multicast The multicast interface is shown as in Figure 7-35.

1317.8.3 Event 7.8.3.1 Video detect 7.8.3.1.1 Motion Detect The moti

132 Figure 7-39 Figure 7-40 Please refer to the following sheet for deta

133Parameter Function clicking OK button to save your motion detection

134 Figure 7-41 7.8.3.1.3 Camera Masking The camera masking interface i

135 Figure 7-43 Figure 7-44 Figure 7-45 Please refer to the following s

136Parameter Function Enable You need to check the box to enable this

137 Figure 7-46 7.8.3.2.3 Alarm Out Here you can set alarm output chann

138 Figure 7-49 Figure 7-50 Figure 7-51 Figure 7-52

139 Figure 7-53 Please refer to the following sheet for detailed informat

5Alarm Relay 30V DC 2A，125V AC 0.5A（activation alarm ） USB Interface

140 Figure 7-54 Figure 7-55 Figure 7-56

141 Figure 7-57 Please refer to the following sheet for detailed informat

142 Figure 7-58 7.8.4.2.2 HDD Setting Here is for you to set HDD group.

143 Figure 7-61 7.8.4.3 Record control The record control interface is

144Start all/ stop all Check the corresponding All button, you can enabl

145 Figure 7-64 Please refer to the following sheet for detailed informat

146 Figure 7-65 7.8.5.2 Account Note: z For the character in the follow

147Hidden user “default” is for system interior use only and can not be d

148 Figure 7-68 7.8.5.2.2 Group The group management interface can add/re

149 Figure 7-70 Modify group Click the modify group button, you can see

62 Overview and Controls This section provides information about front p

1507.8.5.3.1 GUI Here you can set background color and transparency level

151The tour interface is shown as in Figure 7-74. Here you can set tour i

152 7.8.5.4 Default The default setup interface is shown as in Figure 7-

153 Figure 7-78 7.8.5.7 Upgrade The upgrade interface is shown as in Fig

154 Figure 7-80 Please refer to the following sheet for detailed informat

155Please refer to the following sheet for detailed information. Paramet

156For ATM/POS with the protocol, you just need to set the source IP, des

1577.8.7 Information 7.8.7.1 Version The version interface is shown a

158Parameter Function Detailed information You can select one item to

159 Figure 7-88 Then please click search button, you can see the correspo

7Shift current activated control, Left Right W X When playback, click

160installation directory. Or you can download it to your specified direc

161button; you can view the available storage device. See Figure 7-92. Pl

162Please refer to the following sheet for detailed information. Please

1638 Professional Surveillance System Besides Web, you can use our Profe

1649 FAQ 1. DVR can not boot up properly. There are following possibili

165z DVR color or brightness setup is not correct. 6. Can not search l

166z PTZ decoder and DVR address is not compatible. z When there are s

167z System uses too much CPU resources. Please stop record first and th

168Daily Maintenance z Please use the brush to clean the board, socket c

169Appendix A HDD Capacity Calculation Calculate total capacity needed b

8Status indication light Status If there is Fn indication light, curren

170Appendix B Compatible Backup Device List Compatible USB drive list

171Compatible SD Card List Please refer to the following sheet for compa

172Seagate Seagate SV35.1 ST3250824SV 250G SATA Seagate Seagate SV35.1

173Constellation ES Seagate Seagate Constellation ES ST1000NM0031 1T SATA

174Digital Westem Digital WDAV-GP—EVCS WD10EVCS-63ZLB0 1T SATA Westem D

175Maxtor DiamondMax 20 STM3250820AS 250G SATA

176APPENDIX C Compatible CD/DVD Device List NOTE: Please upgrade the DVR

177Appendix D Compatible Displayer List Please refer to the following sh

178Appendix E Compatible Switcher List Please refer to the following she

179Appendix F Compatible Wireless Mouse List Please refer to the followi

9Please refer to the following sheet for detailed information. 1 GND por

180Appendix G Earthing 1. What is the surge? Surge is a short current o

181work. The signal lightning arrester has many specifications, and wide

182 Mixed ground: The mix ground consists of the feature of the one-point

183z The monitor system usually can adopt the one-point ground. z Plea

184For L (live cable) Turn the digital multimeter to 750V AC, use your on

185Appendix H Toxic or Hazardous Materials or Elements Toxic or Hazardous

iTable of Contents 1 FEATURES AND SPECIFICATIONS...

10 Figure 2-3 2.4 Remote Control The remote control interface is shown a

11 Figure 2-4 Please refer to the following sheet for detailed informatio

12 9 Cancel Go back to previous menu or cancel current operation (close

13In input box, you can select input methods. Left click the correspondin

142.6 Virtual Keyboard & Front Panel 2.6.1 Virtual Keyboard The sy

153 Installation and Connections Note: All the installation and operatio

16 All the figurers listed below are for reference only.

17If the distance is too long, you should use twisted pair cable, and you

18c. Alarm input needs the low level voltage signal. d. Alarm input mode

19485 A/B 485 communication port. They are used to control devices such

ii3.4 Rack Installation ...

20Mechanical 50×106 times (3Hz) Longevity Electrical 200×103 times

214 Overview of Navigation and Controls Note: All the operations listed

22 Figure 4-2 4.1.2 Main Menu After you logged in, the system main men

23The other ways is to press power button on the front panel for at least

24Move you mouse to the top centre of the video of current channel, you c

25You need to have proper rights to implement the following operations. P

264.3.4 Enable all channel recording Highlight ○ below All, you can ena

27 Figure 4-11 4.4 Search & Playback Click search button in the mai

282 Search type zHere you can select to search the picture or the record

29►/ Play/Pause There are three ways for you to begin playback. z Th

iii4.3.2 Basic operation...

3011 Backup z Select the file(s) you want to backup from the file list.

31All the operations here (such as playback speed, channel, time and prog

32z System supports synchronization playback and non-synchronous playbac

33 Note Usually, system can playbacks previous N seconds record if there

34Right click mouse and then select multiple-channel preview; you can go

35At the bottom of the menu, there are color bars for your reference. Gre

36 Figure 4-20 4.5.1.2 Redundancy Redundancy function allows you to mem

37z Set redundant disk(s) as read-only disk or read-write disk (Main men

38z In FTP interface please input upload interval. See the interface in

39 Figure 4-24 4.6 Detect 4.6.1 Go to Detect Menu In the main menu, f

iv4.9.6 Activate Pattern Function...

40Monday to Friday as the working day and Saturday and Sunday as non-busi

41 Figure 4-25 Figure 4-26 Figure 4-27

42 Figure 4-28 Figure 4-29 Figure 4-30

43 Figure 4-31 4.6.3 Video Loss In Figure 4-25, select video loss from

44When someone viciously masks the lens, or the output video is in one-co

45z Alarm in: Here is for you to select channel number. z Event type: T

46z Latch: When the anti-dither time ended, the channel alarm you select

47 Figure 4-36 Figure 4-37 4.8 Backup DVR support USB device backup an

48 Figure 4-38 4.8.1 Backup Select backup device and then set channel, fi

49the pictures. Click the Start button; you can copy the specified pictur

v5.6.2 BPS...

50z Parity: there are three options: odd/even/none. Default setup is non

51 Figure 4-43 In Figure 4-43, please click direction arrows (See Figure

52 Figure 4-46 In X328H328H328H Figure 4-43, click page switch button, th

53 Figure 4-48 4.9.2 Activate Preset In Figure 4-47, please input preset

544.9.7 Auto Scan Setup In X347H347H347H Figure 4-38, click border button

555 Understanding of Menu Operations and Controls 5.1 Menu Tree This s

56 Figure 5-1 5.3 Setting In main menu, highlight setting icon and doub

57while the next HDD is no empty, then system stops recording, If the cur

58 Figure 5-3 Figure 5-4 Figure 5-5 Figure 5-6

59 Figure 5-7 5.3.2 Encode Encode setting includes the following items.

vi7.6.1 Image...

60Please highlight icon to select the corresponding function. Figure 5

61Figure 5-11 5.3.3 Schedule Please refer to chapter 4.5 schedule. 5.

62 Figure 5-12 5.3.5 N

63network service. System may pop up dialog box for you to confirm setup

64 Figure 5-13 Figure 5-14 5.3.5.1 Network Setting Network setting in

655.3.5.2 IP Filter IP filter interface is shown as in Figure 5-16. You

66 Figure 5-16 Figure 5-17 Figure 5-18 5.3.5.3 NTP Setup

67You need to install SNTP server (Such as Absolute Time Server) in your

68 Figure 5-20 Here you can set a multiple cast group. Please refer to th

69 Figure 5-21 5.3.5.6 DDNS Setup DDNS setup interface is shown as in F

viiAPPENDIX E COMPATIBLE SWITCHER LIST ...

70Quick DDNS and Client-end Introduction 1) Background Introduction Dev

71 External port：Port that has been mapped locally. z Default: UPNP def

72 Figure 5-25 The WIFI interface is shown as below. See Figure 5-26. z

73 Figure 5-27 After successfully connection, you can see the following i

74 Figure 5-29 5.3.5.9 Email The email interface is shown as below. See

75 Figure 5-30 Figure 5-31 5.3.5.10 FTP You need to download or buy FTP

76 Figure 5-32 You can use a PC or FTP login tool to test setup is right

77z Click the Test button, you can see the corresponding dialogue box to

78 Figure 5-36 Please enable the SNMP function. Use the corresponding sof

79 Figure 5-37 5.3.5.14 Auto register This function allows the device t

viiiWelcome Thank you for purchasing our DVR! This user’s manual is desig

804) Now you can boot up the proxy server. When you see the network statu

81z Resolution: There are four options: 1920×1080, 1280×1024(default),128

82 Figure 5-41 Figure 5-42 5.3.10 Default Click default icon, system po

83After all the setups please click save button, system goes back to the

84Here is for you to view and implement hard disk management. See Figure

85z Each channel is only corresponding with one HDD Group, while one HDD

86When you set the channel setup, please select the corresponding channel

87 Figure 5-49 Click Quota Setup button, you can go to Figure 5-50. Here

88 Figure 5-51 5.5.2 Abnormality Abnormality interface is shown as in Fi

89Here is for you to set proper alarm output. Please highlight icon to s